HP Netserver LXr 8000 to LXr 8500 Upgrade Guide

Chapter 5 Assembling the LXr 8500

8. Check the I/O configuration switches on the I/O baseboard. By default all

of the switches are set in the "Open" (or "Off") position, and normally do

not have to be changed. See Figure 5-9.

Open = Off

Front of NetServer

Shaded rectangle

represents the

depressed side

of the configuration

switch

Closed = On

Rear of NetServer

1 Reserved

Open

2 Recovery Boot

3 Reserved

4 Reserved

5 CMOS Clear

6 Password Clear

7 PCI Hot-Plug Switch Disable

8 Reserved

Figure 5-9. I/O Configuration Switch Settings