HP Netserver LXr 8000 to LXr 8500 Upgrade Guide

Chapter 5 Assembling the LXr 8500
58
Apply Labels, Gaskets and Install Power Supplies
21a. Apply UPGRADED TO LXr 8500
label to chassis below serial number label.
21b. Apply second UPGRADED
label to pull-out card.
Figure 5-18. Apply Labels to Side of Chassis
21. Locate the two "UPGRADED TO LXr 8500" labels shipped in the
Documentation and Miscellaneous kit, and apply them as follows (see
Figure 5-18):
a. Apply one label just below the serial number on the chassis.
b. Apply the second label to the pull-out card that can be read when the
NetServer is installed in the rack.