HP Netserver LXr 8000 to LXr 8500 Upgrade Guide

Chapter 7 Finishing the Assembly
73
5d. Close the PCI board guide latch
after installing each full-length
accessory board.
Figure 7-3. PCI Board Guide Latch
d. Close the PCI board guide latch after installing each full-length
accessory board. (See Figure 7-3.)
6. For all unused PCI slots, make sure that the PCI hold-down latches are in
the closed position. These latches must be closed even if the slots are
empty. Only slots whose PCI hold-down latches are closed will be
powered on.