HP Netserver LXr 8500 Datasheet

6
accessories
product accessory
product no.
memory
• 256MB DIMM
• 512MB DIMM
• 1GB DIMM
• Optional second memory carrier board
D9325A
D7138A
P1222A
D7071A
processor
• Intel Pentium III Xeon 700MHz 1MB L2 cache
• Intel Pentium III Xeon 700MHz 2MB L2 cache
P1734A
P1761A
internal storage devices
• 9.1GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
1
• 18.2GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
1
• 36.4GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
1
• 18.2GB low-profile, hot-swap Ultra3 SCSI disk drive (15,000prm)
1
• 73.4GB low-profile, hot swap Ultra3 SCSI disk drive (10,000rpm)
1
P1168A
P1166A
D9419A
D9421A
P3577A
RAID controllers
• HP NetRAID-1M Controller with 32MB cache (Ultra3 SCSI, 1-channel
PCI card)
• HP NetRAID-2M Controller with 64MB cache (Ultra3 SCSI, 2-channel
PCI card)
• HP NetRAID-2M Controller with 128MB cache
(
Ultra3 SCSI, 2-channel
PCI card)
• HP NetRAID-4M controller with 64MB cache (Ultra3 SCSI, 4 channels)
• HP NetRAID-4M controller with 128MB cache (Ultra3 SCSI, 4
channels)
P3410A
P3411A
P3475A
D9161A
D9351A
host bus adapter • HP Ultra3 SCSI PCI adapter
• HP FC HBA (host bus adapter) card (cluster or standalone)
P3413A
D8602B
external storage
SCSI enclosure
• HP Netserver Rack Storage/12 (Ultra3)
• HP Netserver Rack Storage/12 SCSI Card (Ultra3)
• HP Netserver Rack Storage/12 Cables:
− 2.5-meter SCSI cable, high density to high density
− 2.5-meter SCSI cable, high density to very high density offset
− 5-meter SCSI cable, high density to very high density offset
− 10-meter SCSI cable, high density to very high density offset
− HP Netserver Y Power Cable kit
2
D5989C
D6025C
D3636C
D6020A
D6982A
D6983A
D4991A
1
Ultra3 SCSI performance can only be achieved by using an Ultra3 SCSI controller or an Ultra3 SCSI RAID Controller with the Ultra3 drives.
2
One kit is required for each of the 10th to 15th HP Netserver Rack Storage/12 or HP Netserver Rack Storage/12FC units to be installed in a
single rack.