HP Netserver LXr Pro8 Remote Administrator Guide

Chapter 2 Installing HP Remote Console Redirection
11
If you plan to manage your HP NetServer using either a direct terminal
connection or via modem, and you have chosen not to use Symantec's
pcANYWHERE32, make sure your terminal emulation software:
• Provides remote dial-in and communications features
• Is correctly configured for console redirection
Regardless of which communications software you use, the following parameters
apply at the server's COM port
Table 2: Communications Parameters
Parameter
Required
Baud Rate 19.2K or 38.4K
Data Bits 8
Stop Bits 1
Parity None
Handshaking XON/XOFF
Connect Assert DCD
Disconnect Drop DTR
The remote console's display should closely resemble the characteristics of the
server's display if you use a PC-based, ANSI color terminal emulator that
supports 25-line mode and the IBM PC character set. The table below provides
the terminal settings to use when configuring your communications software for
use with HP Remote Console.