HP Netserver LXr Pro8 Remote Administrator Guide

Chapter 3 Installing Graphic Console Redirection

Table 4: HP NetServer LXr Pro8 Default Serial Port Interrupts

Label

Port Interrupt

Serial A COM 1 3F8h IRQ 4

For best performance, check the FIFO Enabled box.

Be sure to select the same COM port you identified when you configured the

NetServer during BIOS setup. If necessary, recheck that it is COM 1 by rebooting

the server and pressing [F2] to run the BIOS setup program. On the BIOS Setup

Main Menu, using the arrow keys, cursor to the "Console" pull-down menu. The

server console settings are displayed.

NOTE You must reinitialize the modem to enable Remote Console

Redirection.

After you have finished running the Smart Setup Wizard, the pcANYWHERE32

main program window appears.

pcANYWHERE

menu bar

pcANYWHERE

action button bar

To finish configuration, at the main program window:

1. Click "Be A Host PC."

2. Select the Modem connection item (see illustration below).