HP Netserver Remote Administrator Guide

Chapter 3 Integrated RA Setup and Configuration
38
.
Figure 3-17. Version Information Window
The Version Information window displays information that the Configuration
Utility found after checking the installation. Display fields include:
• Integrated RA Software Version number
• Integrated RA Firmware Version number
• HP Copyright information
Exit
When you choose the File menu, the utility displays a menu that you can use to
save and restore Integrated RA configuration parameters in a DOS file.
When you are ready to quit the Integrated RA Configuration Utility choose Exit
from the utilities main menu.
The utility saves the current configuration to a file and exits to the HP NetServer
Navigator.
You are now finished with the first stage of hardware setup, Integrated RA
configuration. The next stage involves installing (or updating) a utility partition on
which you can store a range of configuration and diagnostic utilities.
Installing or Updating a Utility Partition
What follows is the second stage of the hardware configuration process. In the first
stage, you configured Integrated RA. Now you need to install or update the HP