HP Netserver Service Handbook, Volume 3 - High-End

77
c. Embedded SCSI B controller
d. PCI bus slots in the following order: P5, P6
NOTE The PCI controller boot priority can be changed so that the embedded SCSI
controllers precede the PCI bus slots. To do so, run the EISA Configuration Utility
and enable the option called "Boot from Embedded SCSI."
Processors
NOTE: See the Technical Reference Label for the latest switch settings.
Two processor boards, each with a maximum of two CPU chips, can be installed in the system. Check
jumpers and heat sinks using the diagrams below. Speed jumpers on the board have tamper-evident seals.
Processor Type
166 MHz 200MHz
012 PPP 012 PPP
Factory Sealed Jumpers
ITP Scan
Skip / Include
Heat Sinks
CPU 2
CPU 1
200MHz / 512K Processor Board
Voltage ID
Bypass
Processor Type
166MHz
012 PPP12 PP
ITP SCAN
Skip / Include
Heat Sinks
CPU
1
CPU 2
166MHz / 512K Processor Board