HP Netserver Service Handbook, Volume 3 - High-End

88
Power Supply Indicators
AC Input
I
n
d
i
c
a
t
o
r
Attention
Indicator
DC Output
Indicator
Power Supply LEDs
Control Description
DC Output Indicator Lights green when DC power is online. During normal operation, this LED should
always be green.
AC Input Indicator Lights green when the power supply is receiving AC power. During normal
operation, this LED is always green.
If this LED is lit but Standby / DC Good is not, then AC power is present but is not
reaching this power supply.
Attention Indicator Lights amber when the power supply requires service.
Rear Panel Controls, Ports, and Indicators
Rear Panel Control and Indicator Definitions
Control Description
Power Interlock Switch This switch is mounted on the base chassis. When you turn this switch to the
right, you disables DC power and release the satellite chassis so you can
pull it out for service. Unless you turn this switch, you cannot pull out the
satellite chassis nor open the satellite's top cover.
Satellite Ejector Handles These handles are mounted on the satellite chassis. Use them to pull the
satellite out from the base chassis. After turning the power interlock switch,
grasp the ejector handles and pull them down and towards you. The satellite