HP NetserverLXr 8500 with Model FC60 Config Guide for Windows NT4.0 Clusters

2
SPU
Model HP NetServer LXr 8500
Clock speed 550 MHz
No. of CPUs 2 – 8
BIOS version Release 5
CPU cache 2 MB
RAM 1 GB. Must be HP.
No. of power supplies 3
Local storage See Local Storage below.
Storage
Local
Controller May Use - Embedded SCSI, NetRAID-1Si or NetRAID-3Si in PCI slot P1,
otherwise any controller listed on the HP Tested Products List.
May Not Use - NetRAID-1 or NetRAID-3
Cabinets (Physical drive
location)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Disk drives (hot swap or
fixed)
Must be HP
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed.
SCSI Ids Any
Shared
HP SureStore E Disk
Array FC60
(Required)
Host Bus Adapter
Model HP D8602A
No. of HBAs 2
Driver 1.12
SPU I/O slot P5, P6
RAID level 0, 1, 3, 5, or 0 & 1
Array Controller
Model A5635A HP SureStore E Disk Array FC60
RAID arrays
Firmware
Not more than 8 LUNs are permitted.
04.00.00.20 or later
Disk Encolsure
Model A5636A HP SureStore E Disk System SC10
Number of disks 4,5,6,7,8,9 or 10 per enclosure