HP NetserverLXr 8500 with Model FC60 Config Guide for Windows NT4.0 Clusters

3
Disk drives: HP 9.1 GB 10,000 RPM Ultra2 LVD SCSI Disk Module A5637A
HP 18.2 GB 10,000 RPM Ultra2 LVD SCSI Disk Module A5638A
HP 36.4 GB 10,000 RPM Ultra2 LVD SCSI Disk Module A5639A
HP 73.4 GB 10,000 RPM Ultra2 LVD SCSI Disk Module A5640A
Cable, 2M Ultra SCSI, VHDCI A5641A
Cable, 5M Ultra SCSI, VHDCI A5642A
Cable, 10M Ultra SCSI, VHDCI A5643A
Fibre-channel cables
Optical (Server to Hub and/or Shared Storage to Hub):
2-meter Optical Fibre Channel cable A5644A
16-meter Optical Fibre Channel cable A5645A
50-meter Optical Fibre Channel cable A5646A
100-meter Optical Fibre Channel cable A5647A
Optical GBIC D6975A (need two per connection)
Copper (Server to Hub only):
3 meter D6978A
5 meter D6979A
10 meter D7080A
Copper cables include 2 copper GBICs
Hub
Model HP D6976A 6-port fibre channel
Quantity 2
LANs
Intra-cluster (Heartbeat) LAN Client LAN
LAN connection HP D5954A crossover cable or any
equivalent
Any LAN
The intra-cluster LAN may only be
used for cluster node communication
via a crossover cable. It may not be
used for client communication.
NIC:
Model HP D5013A/B (10/100TX PCI) Any that is on both the HP Tested
Products List and the Microsoft
Hardware Compatibility List.
Driver 3.36.10.0000 Any driver
NOTE If the Client and Intra-
cluster LANs are the same model
the Client LAN must use the same
driver as the Intra-cluster LAN.
No. of NICs 1 1 minimum