HP Ultra/Wide SCSI 4 GB and 9 GB Hard Disk Drive

Chapter 1 Prepare Drive for Installation
14
Step 4: Connect SCSI Cable Adapter (if required)
The SCSI cable adapter (see Figure 1-11) allows you to connect an Ultra/Wide
SCSI drive to a narrow SCSI cable and narrow SCSI controller. If you are not
connecting your drive to a narrow cable, continue with Step 5.
Figure 1-12. Narrow to Ultra/Wide SCSI Adapter
•
Plug the narrow SCSI cable into the adapter, aligning the notch in the
connector with the slot in the adapter.
•
Plug the other end of the adapter into the drive. The shape of the connector
prevents it from being plugged into the drive incorrectly.
Step 5: Continue Installation
If you are installing the drive in an HP NetServer L Series, continue with
Chapter 2. If you are installing the drive in an HP NetServer E 45, continue with
Chapter 3.