Manualshelf

Installation Guide for Compaq Racks

ManualsBrandsHP ManualsServerHP NetServer LH 4/LH 4r
20212223242526272829
Chapter 3 Installation
18
Installing the Recessed Mounting Brackets
The NetServer is held in the closed retracted position inside the rack enclosure by
two recessed brackets. These are attached to the face of the NetServer chassis and
the two front rack columns.
To install these brackets:
1. On both slide members, simultaneously depress the lockout releases and
push the NetServer completely into the rack enclosure see Figure 3-9.
Lockout Release
Figure 3-9. Location of Lockout Releases