Installing Debian GNU/Linux on an HP Netserver

3
9. When prompted to Enter Command-Line Arguments select Yes and press
Enter. (There are no arguments to type, so leave the line blank.)
10. Press Enter after the module loads.
11. At Select net modules, select
exit Finished with these modules
and press Enter.
12. At Select Category, select
exit Finished with these modules
and press Enter.
Setting Up the Network
1. At Configure the network, press Enter.
2. Choose the Host name (example: hpserver) and press Enter.
3. At Automatic Network Configuration select No and press Enter. (Say yes if you
prefer this option.)
4. Enter IP, netmask and other network information.
Install the base OS and Configure the Timezone
1. At Install the Base System, press Enter.
2. At Select Installation Medium, select CD-ROM drive and press Enter.
3. Insert the CD-ROM, select Continue and press Enter.
4. At Choose Debian archive path, select OK and press Enter. (Use the default path.)
5. At Select Debian archive path, select The default stable Archive and press Enter.
6. At Configure the Base System press Enter.
7. At Select Timezone, select the appropriate time zone.
Finishing the Setup
1. At Make Linux bootable Directly from Hard Disk, press Enter.