Installing TurboLinux Server on an HP Netserver

provide. The amount of swap space required also varies depending on the amount of
RAM in the system. The following partitioning scheme is given as an example.
9. Create a boot partition.
A. Select DOS FREE under /dev/sda.
B. Click Add a partition.
C. Select partition type Linux ext2.
D. Set the partition size to 20MB.
E. Set the mount point to /boot.
F. Click OK.
10. Create a swap partition.
A. Select DOS FREE under /dev/sda.
B. Select Add a partition.
C. Select partition type Linux swap.
D. set the partition size to 256MB.
E. Click OK.
11. Create a root partition.
A. Select DOS FREE under /dev/sda
B. Select Add a partition.
C. Select partition type Linux ext2.
D. Set the partition size to the desired amount of space.
E. Click OK.
12. Click Next to go to the next step.
13. Click on all the partition to set them for formatting. You may also select to check
for bad blocks while formatting. Be aware that formatting will take considerably
longer to complete with this option on. Click OK to format.