HP Netserver LXr 8000 Surestore E Installation Guide

2
SPU
Model HP NetServer LXr 8000
Clock speed 400 and 450 MHz
No. of CPUs 2 – 4
BIOS version ASPN1.86L.0003.P03.981041252 or later
CPU cache Any size
RAM 256 MB minimum. Must be HP.
No. of power supplies 3
Local storage See Local Storage below.
I/O slots: P3, P4, or P7 – Shared storage controller
P1 – Local storage
P5 – Intra-cluster (Heartbeat) LAN
P6 – Client LAN
All others – Any other plug-in cards.
Storage
Local
Physical drive location SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/8 or /12)
Disk drives Must be HP
Controller
May use embedded SCSI or NetRAID-3Si in PCI slot P1 otherwise any
controller listed on the HP Tested Products List.
May not use embedded RAID, NetRAID-1, NetRAID-3, or NetRAID-1Si.
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed
Shared
Host Bus Adapter
Model HP A5252B Wide Differential SCSI Adapter
No. of HBA 1 – 3 per NetServer
Driver Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller driver in NT
4.0 SP4 or later
SPU I/O slot P3 (1
st
HBA), P4 (2
nd
HBA), P7 (3
rd
HBA)
SCSI ID 7
Disk Array Controller
Model HP A3706A 96MB Controller with SureStore E 12H
No. of controllers 2 per SureStore E 12H
Firmware HP54 or later (SureStore E 12H NT 3.0 release)
RAID level (internal) 1/0 and 5
Logical disks Logical units within each array must be numbered from 0 – 7
Hot spare Active Hot Spare
SCSI ID 0 – 6 or 8 – 15
Disk Array Storage
Model HP A3700AB SureStore E 12H Disk Array
No. of cabinets 1 – 6; maximum 2 SureStore E 12Hs per SCSI bus
Disk modules: HP A3702A 4.2 GB Disk Module
HP A3703A 9.1 GB Disk Module
HP A3710A 18.2 GB Disk Module