HP Netserver LXr 8000 Surestore E Installation Guide
3
Power supply 3
SureStore E Manager 3.0 or later
Cabling HP C2981A 0.5 meter Ultra-flexible SCSI Cable
HP C2911A 0.9 meter 68-pin HD Male to 68-pin HD Male Cable
HP C2924A 2.5 meter 68-pin HD Male to 68-pin HD Male Cable
HP C2925A 10 meter 68-pin HD Male to 68-pin HD Male Cable
(Maximum 25 meters per SCSI bus)
Terminator HP C2905A Wide Differential SCSI Terminator
LANs
Intra-cluster (Heartbeat) LAN Client LAN
LAN connection HP D5954A crossover cable or any
equivalent
Any LAN
The intra-cluster LAN may only be used for
cluster node communication via a crossover
cable. It may not be used for client
communication.
NIC:
Model HP D5013A (10/100TX PCI) Any that is on both the HP
Tested Products List and the
Microsoft Hardware
Compatibility List.
Driver 3.27.00.0001 or later (Do not enable FEC
Features.)
Any driver
NOTE: If the NIC used is the
same as the Intra-cluster LAN,
then the Client LAN must use the
same driver as the Intra-cluster
LAN.
No. of NICs 1 1 minimum
SPU I\O slot P5 P6
Shared Storage Cabling
This part of the guide defines the allowable cabling configurations for Change name here? NetServer
clusters using the HP SureStore E 12H Disk Array. Only these cabling configurations and cables are
supported. These diagrams show single and daisy-chained configurations.