Ultra Hot Swap Hard Disk Drive and Tray

15
B Regulatory Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Address: 10955 Tantau Avenue
Cupertino, CA 95052
declares, that the product
Product Name: Hot Swap Hard Disk Drives
Model Number(s): D3581A, D3582A, D3582C, D3583A, D3583C, D4289A
D5039A, D6019A, D7050A
Product Options: N/A
conforms to the following Product Specifications:
Safety: IEC 950:1991 + A1, A2 / EN 60950 (1992) + A1, A2
EMC: CISPR 22:1993 / EN 55022 (1994) - Class B
1)
EN 50082-1:1992 - Generic Immunity
IEC 801-2:1991, 4 kV CD, 8 kV AD
IEC 801-3:1984, 3V/m
IEC 801-4:1988, 0.5 kV Signal Lines, 1 kV Power Lines
Supplementary Information:
The product herewith complies with the requirements of the following directives, and
carries the CE-mark accordingly:
o Low Voltage Directive 72/23/EEC
o EMC Directive 89/336/EEC
1) This product was tested in a typical configuration with a Hewlett-Packard NetServer
computer and peripherals.
Cupertino, February 8, 2000
Nigel Marrion/Quality Engineering Manager
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department
ZQ / Standards Europe, Herrenberger Straße 130, D-7030 Böblingen (FAX: + 49-7031-143143)