HP Netserver LXr Pro Surestore E Installation Guide

SPU

Model HP NetServer LXr Pro Model 1

Clock speed 200 MHz.

No. of CPUs 2-4 (at least 2 are required)

BIOS version 1.00.08CD0L or later

CPU cache Any size

RAM 128 MB minimum. Must be HP.

No. of power supplies 3

Local storage Internal or external, using any controller. Must use HP disks. See

Local Storage below.

I/O slots: P6-P4 - Shared storage HBAs. See Shared Storage.

P1 - Intra-cluster LAN

P2 - Client LAN

All others - Any other plug-in cards.

LANs

Intra-cluster LAN Client LAN

LAN connection HP D5954A crossover cable or any

equivalent only

Any LAN

The intra-cluster LAN may only be

used for cluster node

communication via a crossover

cable. It may not be used for client

communication.

NIC:

Model HP D5013A (10/100TX PCI)

(or HP J3171A)

Any that is on both the HP Tested

Products List and the Microsoft

Hardware Compatibility List.

Driver 2.24.00.0000 or later Any driver

If the NIC used is the same as the

Intra-cluster LAN, then the Client

LAN must use the same driver as

the Intra-cluster LAN.

No. of NICs 1 1 minimum

SPU I\O slot P1 P2

Local Storage

Physical drive location SPU internal drive bays or HP external drive cabinet (e.g., HP Rack

Storage/8)

Disk drives Must be HP.

Controller SPU embedded controller or any controller (any number, manufacturer

or driver) in any available I/O slot (see SPU I/O slots above).

SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed