HP Netserver LH 3000 Rack Cabling Guide

Chapter 3 Procedure for Connecting and Routing Cables to the LH 3000r
33
Rack Storage/12
Dashed Lines Indicate Dual Bus
Configured Storage
HP NetServer
LH 3000r
Figure 3-1. Overview of Data Cabling of the HP NetServer LH 3000r to an HP
Rack Storage/12
NOTE Figure 3-1 shows an HP Console Switch, which is not
necessary for configuring the system, but is shown for
informational purposes.
NOTE The configuration in Figure 3-1 requires 1 UPS and 1 PDU at
120 V, 200/208 V, and at 220/230/240 V.
For 100 VAC applications, a 3000 VA UPS is required and 2
PDUs must be in place.