HP Netserver LH 3000 Rack Cabling Guide

Chapter 3 Procedure for Connecting and Routing Cables to the LH 3000r
39
Figure 3-4. Power Connection Locations on a Typical Rack (Rear View)
100/120 VAC Rack Power Configurations
The 120 VAC PDU power configurations are detailed in the recommendations
shown below and in Table 3-1 and Figure 3-5.
NOTE 100 VAC configurations are the same as 120 VAC, except for
the UPS and the cable which connects the PDU to it. See Table
3-1 and the notes which accompany it.