HP Netserver LP 2000r Datasheet

3
features (continued)
availability
hot-swap disk drives
• Supports 9.1GB, 18.2GB, and 36.4GB Ultra3 SCSI disk drives (10,000rpm)
• Supports 18.2GB Ultra3 SCSI disk drives (15,000rpm)
network interface
• Dual integrated 10/100TX LAN adapters
• Supports fault tolerance, load balancing, and Cisco Fast EtherChannel
clustering support
• Microsoft Cluster Service
• Novell NetWare Cluster Services
self-restart capability
Automatic Server Restart (ASR) that reboots the server in the event of a NOS hang
self-correcting memory
Manageable error checking and correcting (ECC) system memory and ECC cache memory
testing features
Extensive built-in self-test
hot-swap power
supplies
Optional hot-swap redundant power supply with separate power cords for each power supply
disk array controller
Optional HP NetRAID-1M, -2M, and -4M disk array controllers
duplexing support
• Hot-swap drive cages support duplexing to split the six-drive backplane into two segments
that address three drives each
intelligent management
installation and
configuration
• Easy system setup and configuration with HP Netserver Navigator, which is included with
every server
− Automates the Netserver installation and configuration process
− Provides NOS tuning and system optimization tips
management
software
• HP Toptools provides proactive monitoring and alerting plus easy troubleshooting to keep
Netservers up and running
• Instant Toptools for quick reactive troubleshooting of HP Netservers
• Industry-leading HP OpenView Managex Event Manager for NOS management
• Easy integration with other leading network and system management products
remote administration
• HP Integrated Remote Assistant provides emergency remote access over a modem with
a single unified event log for faster troubleshooting and can also be accessed over the LAN
using Terminal Concentrator
• Optional HP Toptools Remote Control Card for even more powerful remote management,
including remote LAN access, advanced security, online diagnostics, and group actions
• Built-in remote power cycling over the LAN
diagnostic software
HP Diagtools 2.35
standards supported
• IPMI v 1.0 for system monitoring
• SNMP
• DMI