hp lt 6000r and xp512 disk array config guide - for Microsoft Windows 2000 A. S. Clusters PDF, 19K, 12/11/2001

lt6000r2kxp
12/11/01 2
Server Configuration
Parameter Specification
I/O slots Added cards may be installed in any appropriate slot, considering the server
default boot order provided below.
Default boot order IDE CD-ROM, FDD, embedded SCSI A, Embedded SCSI B, PCI slot 6,
PCI slot 5, PCI slot 4, PCI slot 3, PCI slot 2, PCI slot 1
Local Storage
Controller Embedded SCSI, or embedded DAC
Driver For embedded SCSI, sym_hi.sys, version 4.12, or later
For embedded DAC, mraid35x.sys, version 2.66, or later
(all drivers obtained from Navigator CD-ROM, version L.20.00, or later)
Physical drive location Server internal drive bays, or HP external drive cabinet
(e.g., HP Rack Storage/12)
Disk drives Must be HP
SCSI bus Any HP cables that meet SCSI specifications, and any SCSI bus speed
SCSI IDs Any
System software
Navigator CD-ROM Version L.20.00, or later
Operating system
Service pack
Microsoft Windows

2000 Advanced Server
Latest service pack
Power distribution
Layout Redundant power distribution units (PDUs) are recommended.
Shared Storage Configuration
Parameter Specification
Controller
HP Fibre Channel host bus adapter
Model HP D8602B
Number of controllers One
Driver Afcw2k.sys, version 3.0.4107.0
(driver obtained from Navigator CD-ROM, version M.04.00, or later)
Enclosure
HP Surestore E Disk Array XP512
Microcode 01-15-10-00/00
RAID level 5
LUN Emulations OPEN-3
Disk drives Must be HP. Refer to support manuals.
Port host mode 08
Port fabric mode Fabric Off/FC-AL On
Connections Direct Fibre Channel
Fibre Channel Cables
50 meter HP D6980A
100 meter HP D6981A