HP Netserver DiagTools v2.0 User Guide

Chapter 5 Error Message Reference
48
Code Description Recommended Action
4. Change the system board.
0341h Undefined or
invalid command in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0342h Address mark not
found in Random
Test
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0344h Requested sector
not found in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0345h Reset failed in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0347h Drive parameter
activity failed in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0348h DMA overrun error
in Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0349h Attempt to DMA at
64 KB boundary in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0350h CRC or ECC data
error in Random
Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0360h Seek operation
failed in Random
Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
03FEh Diskette data
read/write error in
Sequential Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0380h Drive not ready. 1. Try a different diskette.