HP Netserver LXr Pro8 SCSI Extender

Chapter 2 Installing the SCSI Extender
16
Push down the
release latches
on each slide. Then
push the satellite
partly onto the base
chassis.
Release
Latch
Figure 2-9. Unlocking the Slides
c. If you do not depress these two latches, the satellite cannot move all
the way onto the base chassis.
d. Let go of the release latches. Now grasp the ejector handles and push
the satellite chassis the rest of the way onto the base. Be careful to
keep the ejector handles in the "down" position.
e. When the satellite chassis slides as far forward as it can go, push the
ejector handles up.
f. Replace the retention bracket as shown in Figure 2-4.
g. At the front, relatch the power supplies.
7. Lock the power interlock key switch by turning it counter-clockwise.
Ensure the indicator lights come up correctly. See "Power Supply
Indicators" in the HP NetServer LXr Pro8 User Guide.