HP Netserver LXr Pro8 User Guide

Chapter 3 Opening and Closing the

HP NetServer

Push down the

release latches

on each slide. Then

push the satellite

partly onto the base

chassis.

Release

Latch

Figure 3-4. Unlocking the Slides

If you do not depress these two latches, the satellite cannot move all the

way onto the base chassis.

3. Let go of the release latches. Grasp the ejector handles and push the

satellite chassis the rest of the way onto the base. Be careful to keep the

ejector handles in the "down" position.

4. When the NetServer slides as far forward as it can go, push the ejector

handles up until they stop.

5. Replace the retention bracket as shown in Figure 3-2.

6. Relock the power interlock switch by turning it counter-clockwise. See

"Power Up Procedure" in Chapter 2.

7. At the front, relatch the power supplies. Ensure the indicator lights on the

power supplies come up correctly during the power-up procedure before

reattaching the front bezel. See "Power Supply Indicators" in Chapter 1.