HP Netserver LXr Pro8 User Guide

67
8 Connecting the Monitor, Keyboard,
Mouse, and UPS
Introduction
This chapter explains how to connect a monitor, keyboard, mouse and
Uninterruptible Power Supply (UPS) to the communications ports at the rear of
the HP NetServer.
Procedure
Follow this procedure:
1. Connect the monitor, keyboard and mouse to the HP NetServer LXr Pro8.
Figure 8-1 shows which port to use for each device.
I2C
Connector
Serial
Port B
Serial
Port A
Mouse
Port
Parallel
Port
Keyboard
Port
Rear of Satellite Chassis
Port 80
LEDs
Connect Monitor
to Video Card
Figure 8-1. Ports