HP Netserver LXr Pro8 User Guide

Chapter 10 Information Assistant
85
5. Follow the instructions that appear on your screen.
Running the Setup Program on a Client PC
To run the HP NetServer Information Assistant from a client PC, it is necessary
for the client to run the setup program that was installed onto the network hard
disk, as follows:
1. Run Windows and display the Program Manager.
2. From Program Manager, select the File menu and choose Run.
3. At the command prompt, type the network location where the HP
NetServer Information Assistant files were installed, followed by setup.
For example, if Information Assistant was installed on drive
"N:\windows\iaclient," you would enter the following:
N:\windows\iaclient\setup
4. Follow the instructions that appear on your screen.