Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAID 3Si Adapters

Chapter 9 Managing Servers Over the Network
104
For clients or servers running Windows NT, select one or more of the
following utilities to install:
◊ NetRAID Registration Server manages a list of HP NetRAID adapters.
◊ NetRAID Access Service allows server management over the network.
◊ NetRAID Assistant is the management utility.
8. For the Destination Directory, type the path of the directory in which to
install the utilities on this client or server.
9. For Select Folder, accept the default or type the name of the folder in
which to install the utilities on this client or server.
10. When Setup asks for the next diskette, remove Diskette 1 and insert
Diskette 2 of "NetRAID Assistant for Windows NT and Windows 95."
Setup copies various files.
11. In the Setting Password window, type the password that must be given for
Full Access mode to manage this server. Passwords are case-sensitive.
NOTE The Setting Password Screen appears only if you
installed HP NetRAID Access Service in Step 7.
12. Choose to restart Windows now or defer this until later. The Setup
program is now complete.
Edit the regserv.dat and hosts Files
13. Edit the regserv.dat file to replace localhost with the name of the
Registration Server for this network.
◊ In Windows NT systems you will find regserv.dat under this
pathname where <winnt path> is the path to the Windows files:
<winnt path>\system32\drivers\etc\regserv.dat
◊ In Windows 95 systems you will find regserv.dat under this
pathname where <win95 path> is the path to the Windows files:
<win95 path>\system\regserv.dat