Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAID 3Si Adapters

Chapter 1 Introduction
11
CAUTION All HP NetRAID adapter cards are sensitive to static
electricity and can easily be damaged by improper handling.
Using a grounding strap is recommended. Read the following
information carefully before you handle the accessory:
• Leave the adapter card in the antistatic bag until you are
ready to install it.
• If possible, use an antistatic wrist strap and grounding
mat.
• Before you remove the adapter card from the bag, touch a
grounded, unpainted metal surface on the system to
discharge static electricity.