Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAID 3Si Adapters

Chapter 5 Installation and Configuration

Remove the board extender now, before you connect the Battery Backup Unit.

Save the board extender for future use if you move the adapter to another system.

Figure 5-1. Remove Board Extender Before Installing the Adapter in

HP NetServer LXr Pro Systems

Install Additional Memory

For the HP NetRAID adapter, cache memory resides in a 4 MB battery-backed

60-ns FPM (Fast-Page Mode) DRAM SIMM. You can install an additional 16 or

32 MB of cache memory, using the D6029A SIMM Upgrade for HP NetRAID.

For the HP NetRAID-3Si adapter, cache memory resides in a 16 MB battery-

backed 60-ns DO (Extended Data Output) DRAM SIMM.

To install additional cache memory:

1. Verify that the Battery Backup Unit is not plugged in on the HP NetRAID

or HP NetRAID-3Si adapter.

2. Install the new SIMM according to the instructions supplied with the

additional memory.