Installing SuSE on an HP Netserver

12. At the System Boot Configuration screen, select Custom LILO configuration. The
option Write LILO to the boot disk should be set. Also check the use the linear
option box. Click Next.
13. At the Personalize screen, enter all the required information to create an account on
the system. Click Next.
14. Set the password for the super user (root). Click Next.
15. Review the installation summary. Click Back if you need to make any changes to it,
otherwise click Next to begin the install. Click Yes to confirm and start the install.
16. At then end of the installation, click OK to boot the new system.
17. Remove the CD, and wait for the system to boot Linux.
18. (Optional) If you have installed the X Window System, you will have to configure
your monitor.
A. At the Configure Monitor screen, select your Monitor. If you are using a generic
monitor, you may choose VESA model 1024x768 @ 70Hz as your monitor. Entering
wrong horizontal and/or vertical sync rate may damage your monitor. Please
consult your system documentation. Click Next.
B. At the Desktop Settings screen, select the desktop settings. Click on Change if
you do wish to make additional modifications. Click Next to test your settings.
C. Using the arrow keys, you can adjust the desktop if necessary. Click Save if you
are satisfied with the settings. If you experience problems, click abort to go back and
adjust your configuration.
19. Click on Configure Hardware to configure the network.
20. Click on Network to go the Network device setup screen.
21. Select the card you would like to configure, then click activate card. It is
recommended to use DHCP to assign IP to hosts, but you can also select to use a
static IP. Click on the Hostname and nameserver button to configure hostname,
domain name, name server list and the domain search list. Click Next to go back to
the previous menu. Click on Routing to set the gateway. Click Next to finish the
network setup. Repeat these steps for additional network devices
22. Click Finish when all network devices are configured.
23. Click on Finish installation to complete the process. The system will now finish its
booting sequence.
Congratulations! You just installed SuSE Linux 7.2 Professional!