HP Netserver LH 3 and LH 3r Quick Service Guide

Removing the Covers (LH 3X)

Cover 1 Cover 2

Cover 3

Cover

Cover 1

Cover 2

Removing the Covers (LH 3r)

Cover 1

Cover 2

Cover

Memory

There are four DIMM sockets on the system board for memory expansion. You can use 64 MB, 128 MB, and 256 MB

DIMMs for a maximum capacity of 1 GB of RAM.

• The minimum memory configuration for the NetServer LH 3/LH 3r is one 128 MB DIMM.

• The system board DIMM sockets are numbered from 0 to 3.

• DIMMs may be installed in any quantity and in any DIMM socket on the system board. DIMMs that differ in

capacity can be mixed.

CAUTION Do not rock the DIMM into place, but apply firm and even pressure directly downward. If the

retaining clips do not close, remove the module and repeat Steps 3 through 5.