HP Netserver LH 3 and LH 3r Quick Service Guide

4
Boot Device Priority
Slot 1 16-bit ISA or 32-bit PCI
Slot 2 32-bit PCI
Slot 3 32-bit PCI
Slot 4 32-bit PCI
Slot 5 32-bit PCI
Slot 6 32-bit PCI
Slot 7 32-bit PCI
Slot 8 32-bit PCI
Boot order for PCI controllers is determined by slot location. The system searches for a bootable device
in the following order:
1. IDE CD-ROM drive with a bootable CD-ROM.
2. Flexible disk drive with a bootable flexible disk.
3. Embedded SCSI controller or embedded DAC.
4. PCI boards in slots in the following order: 8, 7, 6, 5, 4, 3, 2, 1.
DIMM Slot LED Blink Codes
LED Error Codes
= LED on = LED off
Alternating Blink Code:
LED LED LED LED
0 1 2 3
Error Condition Corrective Action
Primary VRM Failure
Check that primary voltage regulator module
(VRM) is correctly seated. If problem persists,
replace VRM.
Secondary VRM
Failure
Check that secondary VRM is correctly
seated. If problem persists, replace VRM.
Processor Over-
Temperature
Check fan for function. Turn off system, wait
20-25 minutes for system to cool, and restart
system.