Hewlett-Packard Network Server Division HP NetServer lp 1000r Frequently Asked Questions
HP NetServer lp 1000r Frequently Asked Questions Q1. Which Processors are supported in the NetServer lp 1000r A1. The NetServer lp 1000r supports Intel Pentium III 866 MHz, P III 933 MHz and PIII 1 GHz processors. Q2. What is new on the front panel of the NetServer lp 1000r? A2. The front panel from left to right has: Q3. Reset button This switch is to reset the NetServer. Over temperature LED This LED indicates green when normal and amber for warning over temperature conditions.
Dual RJ-45 LAN connector and two LEDs to indicate LAN speed and link Serial Port A Embedded Remote Management Port or Serial Port B Parallel Port (ECP/EPP) Mouse Port Keyboard Port USB ports Monitor Port (SVGA) Power Connector External SCSI port A3. Q4. What IDE devices come bundled in the NetServer lp 1000r? A4. The NetServer lp 1000r comes bundled with a slim IDE CD-ROM drive. IDE hard drives are not supported on lp 1000r. Q5.
A10. Interface IDE Max number of devices supported 1 Factory installed slim CD-ROM drive Floppy 1 Factory installed slim floppy drive in shelf 4 UW U3 SCSI Channel A Up to 3* Hot – Swap HDD slot 1,2,3 LowProfile (LP) Installed devices and addresses Embedded SCSI controller (address=ID 7) *Both SCSI channels (A and B) can support up to 14 devices, however there are only enough bays to plug 3 Hot-Swap HDD. Channel B is to install external SCSI devices. Q11.
256 Colors 640x480 200Hz 800x600 200Hz 1024x768 150Hz 1152x864 120Hz 1280x1024 100Hz 1600x1200 76Hz By default the IRQ for video is disabled. 65K Colors 16.7M Colors 200Hz 200Hz 150Hz 120Hz Not Available Not Available 200Hz 160Hz Not Available Not Available Not Available Not Available Q20. What are the supported Network Operating Systems (NOS) on lp 1000r? A20. The lp 1000r supports Microsoft Windows 4.