HP Netserver LXr 8000 Datasheet

8
specifications
$FFHVVRULHV
HP NetServer Rack Storage/12FC D5991A
External Storage Enclosures
(Fibre Channel)
HP FC Array disk array controller (includes three 3-meter cables and
three copper GBICs)
D5990A
HP FC Hub (includes one 3-meter Fibre Channel cable and two
copper GBICs)
D6976A
HP FC HBA (host bus adapter) card D6977A
Storage Devices:
• 4.2GB, 7,200rpm hot-swap Ultra2 SCSI disk drives, low profile
• 9.1GB, 7,200rpm hot-swap Ultra2 SCSI disk drives, low profile
• 9.1GB, 10,000rpm hot-swap Ultra2 SCSI disk drives, low profile
• 18.2GB, 7,200rpm hot-swap Ultra2 SCSI disk drives, half-height
• 18.2GB, 7,200rpm hot-swap Ultra2 SCSI disk drives, low-profile
• 18.2GB, 10,000rpm hot-swap Ultra2 SCSI disk drives, half-height
D6104A
D6106A
D6107A
D6108A
D7174A
D7031A
HP NetServer Rack Storage/12FC Cables:
• 1-meter SCSI cable, high density to very high density offset
2
• 3-meter Fibre Channel HSS DC to HSS DC copper cable with
2 copper GBICs
3
• 5-meter Fibre Channel HSS DC to HSS DC copper cable with
2 copper GBICs
• 10-meter Fibre Channel HSS DC to HSS DC copper cable with
2 copper GBICs
• 50-meter Fibre Channel multimode short-wave optical with
2 optical-fibre GBICs
• 100-meter Fibre Channel multimode short-wave optical with
2 optical-fibre GBICs
D7131A
D6978A
D6979A
D7080A
D6980A
D6981A
1
Please see the
HP NetServers Configuration Guide
, P/N 5968-1542EUC, for important
technical information when choosing your accessories, or see HP NetServer configuration
tools located at http://www.hp.com/go/netserver.
2
Required for dual SCSI channel RS/8 configuration when connecting to RS/12FC.
3
Gigabit interface converter (GBIC) is attached to each end of the cable and is installed into
the FC Hub and the FC HBA.