Installing IBM OS/2 e-Business on an HP Netserver
1
IBM OS/2 Warp Server for e-Business
Installation Guide for Hewlett-Packard
NetServers
NOTICE: The information in this document was last updated for the HP NetServer Navigator CD-ROM version L.17.01. If you
don't have the L.17.01 version CD-ROM and you're obtaining this document from the HP NetServer web site as a reference to
install an operating system, be sure to also check the HP NetServer web site for the latest available drivers.
©Copyright Hewlett-Packard Company
September 7, 1999
(This document is only available in English.)
Introduction
The objective of this document is to help Hewlett-Packard customers install IBM OS/2 Warp
Server for e-business on a HP NetServer system. For additional information on Hewlett-Packard
NetServers refer to the HP Information Assistant on the HP NetServer Navigator CD-ROM.
It is critical to know which disk adapters or disk array adapter are in the system before you start
the installation. The tables in the Appendix will help you identify what adapter is implemented or
embedded on the system board for each HP NetServer.
NOTE: The IBM OS/2 Warp Server for e-business is not supported on the HP NetServer
E series (E 30, E 40, E 45, E 50, and E 60).
Table of Contents
Installation Procedure: OS/2 Warp Server for e-business
Requirements
Creating the HP Drivers/Utilities Diskette
Installation Steps
APPENDIX
Installation Procedure: OS/2 Warp Server for e-business
Requirements
• Driver's Diskette for OS/2 Warp Server for e-business created from the HP NetServer
Navigator CD diskette library.
• OS/2 Warp Server for e-business CD