HP Netserver LP 2000r User Guide
Chapter 1 Controls, Ports and Indicators
5
Power Supply Bay #1
Power
Supply
LED
AC for PS Bay #1
AC for PS Bay #2
Power Supply Bay #2
Serial B
Keyboard
Serial A/
Management
Lan A/Management
Parallel
External SCSI Port
PCI Slots (3)
Slot 3
Slot 2
Slot 1
Lan B
Mouse
USB (2)
Video
Figure 1-3. Rear Panel and Ports
Table 1-3. Rear Panel LED Indicators
Indicator
Definition
Power Supply LED
Each power supply module has a status LED:
• Steady Green indicates the power supply module is powered
up and operating normally.
• Flashing Green indicates that AC current is present and the
power supply module is in standby mode (HP Netserver is
powered off).
• Steady Amber may indicate a power module failure, a system
over-current condition, a blown fuse in the power supply
module or cage, or that no AC is present.
• Off indicates the AC line cord is unplugged from all installed
power modules.
Link LED
This LED is the activity/link indicator:
• Steady Green indicates a valid LAN link.
• Flashing Green indicates there is LAN activity.
LAN Speed LED
This LED is the LAN speed indicator:
• Steady Amber shows LAN is operating at 100 Mbps LAN
speed.
• Off shows LAN is operating at 10 Mbps LAN speed.