HP Netserver LP 2000r User Guide

Chapter 13 Alternative Rack Mounting (4–Post)
113
3. Install the slides in the rack:
a. Insert the slide into the rack at the location you have marked on the
front and rear columns.
The slide bolts insert into the 2nd hole, counting from the base of the
HP Netserver.
b. Tighten the nuts (saved from Step 1) onto the slide bolts to secure the
slides to the columns. Use the M10 socket Torx driver to tighten the
nuts. See Figure 13-5.
Figure 13-5. Installing the Slides in the Rack