HP Netserver LP 2000r User Guide

Chapter 7 Rack Mounting the HP Netserver (4-Post)
64
Attaching the Cable Management Arm
The Cable Management Arm (CMA) allows the cables and power cord to move in
and out with the HP Netserver chassis without being accidentally disconnected.
The Cable Management Arm installation is tool-less.
1. Ensure the HP Netserver is pushed all the way into the rack.
2. Attach the Cable Management Arm to the rack:
a. Mount the outer flange of the Cable Management Arm on the pins on
the left slide rear bracket.
b. Tighten the thumbscrew on the flange to secure the Cable Management
Arm to the rack. See the example in Figure 7-8.
Outer Flange
of CMA
Inner Flange
of CMA
Chassis Slide
Mount
Rear
Bracket
Pins
Figure 7-8. Attaching the Cable Management Arm (CMA)