HP Netserver LP 2000r User Guide

Chapter 8 Rack Mounting the HP Netserver (2-Post)

operating efficiency. For more information, see “Rack Configuration Tools” later

in this chapter.

Tools Required

You will need the following tools to install the HP Netserver in a 2-post rack:

• Standard Phillips screwdriver

• Marking pen or masking tape

HP Netserver Rack Mount Parts List

Ensure the rack-mounting kit provided with the HP Netserver contains the

following parts:

Table 8-1. Parts for Rack Mount Kit

Quantity Description

2 Flush mount brackets (one left and one right side)

2 Center mount brackets (one left and one right side)

8 Screws for Brackets (standard Phillips)

Rack Configuration Tools

The HP rack configuration tools, including white papers, are on HP's web site at

the following URL:

http://www.hp.com/netserver

At the Web site, search for the following:

• Configuration tools

• High density rack solutions

• Rack Assistant, Rack Configuration

• Order Assistant

• HP Netserver High Density Rack Solutions Overview (LP 1000r and LP

2000r)

You can read about the tools or download copies for installation. These tools can

be used to plan a rack configuration for the components in your system.

The white papers, particularly the HP Netserver High Density Rack Solutions

Overview (LP 1000r and LP 2000r), provide rack information for HP Netservers