HP Netserver LP 2000r User Guide

Chapter 10 Configuring the HP Netserver
84
Contents of the HP Netserver Navigator CD-ROM
The Main Menu of the Navigator CD directs you to modules where you can
perform the required configuration tasks, or access the utilities used in the
configuration process. These tasks include:
Configuring the Netserver hardware (Setup mode only)
Preparing the Netserver for NOS installation (Setup mode only)
Viewing information about the Netserver (such as Readme file,
Configuration Advisories, Tested Products List)
Obtaining software and drivers for the Netserver
Before the HP Navigator Main Menu is displayed initially, you may be prompted
to set the language, time, date and select an Network Operating System (NOS) to
be used throughout the session.
If you have questions about the how to use the Navigator CD, refer to the
instructions provided with the Navigator CD-ROM or the Help menu.
Obtaining HP Netserver Navigator Release History
The release history (archive) of the HP Netserver Navigator CD-ROM provides
you with a list in numerical order of the firmware upgrades and software drivers
for the HP Netserver. The release history is updated in the archive for each new
release of the HP Netserver Navigator CD-ROM. The most current Status Report
provides the latest information for your particular HP Netserver. To ensure you
have the latest versions of the HP Netserver Navigator software, obtain the current
HP Netserver Navigator CD-ROM release history in the archive.
The following items are contained in the Status Report for each CD-ROM release:
Version number (HP Netserver model specific)
HP models supported
Release date
Document Number
Part number of the HP Navigator CD-ROM
Major changes to the HP Navigator CD-ROM made for a specific release
The Status Report for your specific HP Netserver Navigator CD-ROM
describes in detail any software updates between this version of the
CD-ROM and the previous version.