HP Netserver LT 6000r Installation Guide
Chapter 10 Configuring the HP NetServer
108
5. Type in the minutes, and press Enter to move to the seconds field.
6. Type in the seconds, and press Enter and use the arrow keys to leave this
field.
7. Use the up and down-arrow keys to scroll to the System Date field, and
enter the system date in the field.
The dates are entered in the System Date field in the same way as the time
is entered in the System Time field. This field has three separate sub-fields
for month, day, and year enclosed in brackets [xx/xx/xxxx].
8. Type in the month, and press Enter to move to the day field.
9. Type in the day, and press Enter to move to the year field.
10. Type in the year, and press Enter and use the arrow keys to leave this
field.
11. Use the right or left-arrow key to select the Exit menu.
12. Choose "Exit Saving Changes" from the list of exit options, and press
Enter. A dialog box appears, asking you to confirm you decision.
13. Choose Yes, and press Enter. The HP NetServer will reboot.
Setting the HP NetServer’s Boot Passwords
The HP NetServer can have separate administrator and user passwords. The user
password is limited in access once booted.
To configure the HP NetServer for passwords, and to require a password during
boot-up, perform the following procedure:
1. If not already in the Setup Utility, boot or reboot the server, and press [F2]
when prompted.
2. Use the right or left-arrow key to select Security from the menu bar. As
soon as it is selected, the following selections for the Security menu
appear:
Power-On Password
Hardware Security
NOTE The pointer indicates the presence of a submenu.