HP Netserver LT 6000r Installation Guide

Chapter 12 Troubleshooting
125
d. Verify that the DIMMs are firmly seated on the system board. Verify
that added DIMMs are HP DIMMs.
e. Close the access panels and lock the system.
f. Replace all power cords and cables.
g. Power on the monitor.
h. Power on the server.
i. Check for error messages.
4. Copy DiagTools from the HP NetServer Navigator CD-ROM to diskette
and run it from diskette.
5. Invoke the Event Log Report Utility from the NetServer Utility to display
all reported errors. Select NetServer Utility, then More NetServer Utilities,
then Event Log Report Utility. You can also view reported errors from the
control panel by pressing the Enter button to bring up the Event Log.