HP Netserver LT 6000r Installation Guide

Chapter 13 Alternative Rack Mounting
139
2. With the help of at least one other person, lift the server by its four
handles, and position it directly over the extended slides (see Figure 13-7).
Figure 13-7. Mounting the NetServer
NOTE The arrows embossed on the sides of the LT 6000r must line up
with the slide’s mounting hooks before you lower the server
onto the slides. These hooks fit inside the server as you lower it
onto the slides.
WARNING The LT 6000r weighs up to 100 lbs (45 kgs). At least two
people are needed to lift the server into position. Failure to
observe this warning could result in serious injury to you or
damage to the LT 6000r.
3. Lower the server onto the slide members. Ensure that the mounting hooks
have been properly seated inside the chassis.