HP Netserver LT 6000r Installation Guide

Chapter 7 Installing Additional Processors
74
Figure 7-6. Installing a VRM
CAUTION Do not touch the VRM components as you push it into its slot.
Replace the System Board Assembly
1. Insert the system board assembly into the system board access panel, and
ensure that the release latches snap completely closed. Ensure that the
latches are closed by pressing inward on them.
2. Close the system board access panel according to the instructions in
Chapter 3, Opening and Closing the HP NetServer.
3. Reconnect the power and cables.
4. Restore the NetServer to normal operation.