HP Netserver LT 6000r Installation Guide

Chapter 7 Installing Additional Processors
75
Setting the Processor Speed
Processor speeds are set from the system switch located on the system
board.
NOTE Some processor speeds may not be supported. For latest
information, visit the HP website:
http://www.hp.com/go/netserver
Figure 7-7. System Switch Location
Determine the processor speed from the following table, and set the system switch
accordingly.
Table 7-1. System Switch Settings—Processor Speed
Speed Switch 1 Switch 2 Switch 3 Switch 4
550 MHz ON OFF OFF OFF
600 MHz OFF ON ON ON
650 MHz OFF ON ON OFF
700 MHz OFF ON OFF ON
750 MHz OFF ON OFF OFF