HP Netserver LXr 8500 Rack Cabling Guide

1
1 Preparation for Cabling the
NetServer LXr 8500
About Cabling the LXr 8500
NOTE A checklist for the cabling process is included in Appendix A.
Before You Use this Cabling Reference Guide
This HP NetServer LXr 8500 Rack Assembly and Cabling Reference Guide
assumes that you have the rack assembly process completed, have mounted the
HP NetServer LXr 8500, and are ready to cable the components in the rack
enclosure.
If you want a high-level checklist to use in this process, see Appendix A.
For instructions on how to install the HP NetServer LXr 8500 in a rack, consult
the Installation Road Map shipped with your rack or the Installation Guide
shipped with your NetServer unit.
NOTE For instructions on how to assemble other components in a
rack, please find and follow the documentation shipped with
your rack components. If there is no such documentation with
your rack and components, check the separately orderable
installation kit. Or, use the generic rack assembly process
described in this chapter.
The HP NetServer LXr 8500
This Cabling Reference Guide is for the rack-optimized HP NetServer LXr 8500
shown in Figure 1-1.