HP Netserver LC 2000 FC Config Guide

LAN connection HP D5954A crossover cable or any

equivalent.

Any LAN

The intra-cluster LAN may only be

used for cluster node

communication via a crossover

cable or VLAN. It may not be used

for client communication.

NIC:

Model Embedded NIC Any that is on both the HP

Tested Products List and the

Microsoft Hardware

Compatibility List.

For SPOFless, use D5013A or B.

Driver Hptxnt.sys 4.02.30 or later The vendor supported driver.

NOTE If the NIC used is the

same type as the embedded NIC

(D5013A/B), then the Client

LAN NIC must use the same

driver as the Intra-cluster NIC.

No. of NICs 1 1 minimum

For SPOFless, 2 NICs

configured as a fault-tolerant

team are recommended.

Shared Storage Cabling

This part of the guide defines the cabling configurations for clusters using the HP NetServer

LC2000 and HP Rack Storage/12FC. Only these cabling configurations and these cables are supported.