HP Netserver LC II NetRAID Config Guide for Windows NT4.0 Clusters

Service pack SP3 and hotfix "clusfixi", or later

SPU

Model HP NetServer LCII

Clock speed 266, 300, or 333 MHz.

No. of CPUs 1 – 2

BIOS version 4.06.23 or later

CPU cache Any size

RAM 64 MB minimum. Must be HP.

Local storage Internal or external, using any controller. Must use HP disks. See

Local Storage below.

I/O slots: P5 – P6 Shared storage controller

P1-P4 – Intra-cluster (Heartbeat) LAN

P1-P4 – Client LAN

All others - Any other plug-in cards.

LANs

Intra-cluster (Heartbeat) LAN Client LAN

LAN connection HP D5954A crossover cable or any

equivalent only

Any LAN

The intra-cluster LAN may only be

used for cluster node

communication via a crossover

cable. It may not be used for client

communication.

NIC:

Model HP D5013A (10/100TX PCI)

(or HP J3171A)

Any that is on both the HP

Tested Products List and the

Microsoft Hardware

Compatibility List.

Driver 2.24.00.0000 or later Any driver

If the NIC used is the same

as the Intra-cluster LAN,

then the Client LAN must

use the same driver as the

Intra-cluster LAN.

No. of NICs 1 1 minimum

SPU I/O slot P1-P4 P1-P4

NOTE HP strongly recommends that you place the Client LAN in P1 and the Intra-cluster

LAN in P4.